CD Burn Trouble revisited

[Kendric Beachey]

Actually, that output was obtained using gcombust.  So I don't have the exact 
command line.  But generally, I was trying to burn the ISO for disc 2 of 
Mandrake 7.2, which I had previously mounted to be sure it was legit.  I 
tried burning at 8x, which errored out pretty quickly, and at 4x, which 
errored out in about twice the time, so probably after getting the same 
amount of processing done.

FWIW, both tries were in "dummy" mode just in case a coaster was in the 
works, so I still haven't made any coasters.  :-)

On Monday, 15 January 2001 08:36, Brian Densmore wrote:
> What does your cdrecord command line look like?
>
> Brian
>
> > -----Original Message-----
> > From: Kendric Beachey [mailto:ak at kc.rr.com]
> > Sent: Sunday, January 14, 2001 1:58 PM
> > To: kclug at kclug.org
> > Subject: CD Burn Trouble revisited
> >
> >
> > I too am experiencing the same trouble burning CDs, getting
> > errors from
> > cdrecord such as the following...
> >
> > Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C)
> > 1995-2000 Jörg Schilling
> > TOC Type: 1 = CD-ROM
> > scsidev: '0,0,0'
> > scsibus: 0 target: 0 lun: 0
> > Linux sg driver version: 2.1.39
> > Using libscg version 'schily-0.1'
> > atapi: 1
> > Device type    : Removable CD-ROM
> > Version        : 0
> > Response Format: 1
> > Vendor_info    : 'YAMAHA  '
> > Identifikation : 'CRW8824E        '
> > Revision       : '1.00'
> > Device seems to be: Generic mmc CD-RW.
> > Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> > Driver flags   : SWABAUDIO
> > Drive buf size : 3172848 = 3098 KB
> > FIFO size      : 4194304 = 4096 KB
> > Track 01: data  552 MB         padsize:  30 KB
> > Lout start:     634 MB (62:53/44) = 282869 sectors
> > Current Secsize: 2048
> > ATIP info from disk:
> >   Indicated writing power: 4
> >   Is not unrestricted
> >   Is not erasable
> >   Disk sub type: Medium Type A, high Beta category (A+) (3)
> >   ATIP start of lead in:  -11079 (97:34/21)
> >   ATIP start of lead out: 359849 (79:59/74)
> > Disk type:    Long strategy type (Cyanine, AZO or similar)
> > Manuf. index: 11
> > Manufacturer: Mitsubishi Chemical Corporation
> > Blocks total: 359849 Blocks current: 359849 Blocks remaining: 76980
> > Starting to write CD/DVD at speed 4 in dummy mode for single session.
> >  Track 01:   0 of 552 MB written. Sense Bytes: 70 00 05 00 00
> > 00 00 0A 00 00
> > 00 00 21 00 00 00
> > Sense Key: 0x5 Illegal Request, Segment 0
> > Sense Code: 0x21 Qual 0x00 (logical block address out of
> > range) Fru 0x0
> > Sense flags: Blk 0 (not valid)
> > /usr/bin/cdrecord: Input/output error. write_g1: scsi
> > sendcmd: retryable error
> > status: 0x2 (CHECK CONDITION)
> >
> > write track data: error after 18665472 bytes
> > Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
> > Writing  time:   42.091s
> > WARNING: Some drives don't like fixation in dummy mode.
> > /usr/bin/cdrecord: fifo had 358 puts and 295 gets.
> > /usr/bin/cdrecord: fifo was 0 times empty and 157 times full,
> > min fill was
> > 93%.
> >
> >
> > The part about block 0 not being valid led me to try a
> > different CD, figuring
> > the one I was using was just faulty, but it doesn't seem to
> > make a difference.
> >
> > This CD-RW drive has successfully burned before, under that
> > other operating
> > system though.
> >
> > Has anyone made any headway on this issue?
> >
> > --
> > Kendric Beachey
> > ak at kc.rr.com
> >
> >
> > majordomo at kclug.org

-- 
Kendric Beachey
ak at kc.rr.com