Nope.  In fact, there's barely more than 2GB total on the entire system, 
and /var, as well as all my other partitions except /boot are on the 
same root partition, so it has about 10 or 11 GB free.

James

Christopher A. Bier wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
>   Is the partition that /var is on full or almost full?
> 
> On Thu, 2003-03-13 at 13:53, James Colannino wrote:
> Hey everyone.  I've had some problems with an old machine of mine for a 
> 
>>while.  I have a P200 MMX running Slackware 8.1 that's worked very
> 
> well 
> 
>>so far.  The BIOS is able to recognize all 13GB of my HD which I've 
>>found to be quite rare with such an old machine, and it seemed for a 
>>while to be pretty stable.
>>
>>However, everytime I try to run "updatedb" so that I can locate files,
>>it works for a few minutes and then always without fail will give me a
>>segmentation fault.  Then, if I've attempted that command, everytime I
>>halt or restart the system, it'll give me a segmentation fault as it's
>>unmounting all remote filesystems (I don't actually have any -- I'm 
>>planning on removing all references to nfs from the system.)  If I 
>>haven't tried to updatedb, it halts and restarts without any problems.
>>
>>After I've gotten one segmentation fault from running the command 
>>"updatedb," from now on, until I reboot the system, it doesn't even
> 
> work 
> 
>>the Hard Drive at all before I get the same error, this time saying 
>>something about a NULL Pointer.
>>
>>This is really frustrating me.  I'm pretty sure from other
> 
> observations 
> 
>>I've made that excessive writing (and/or reading -- not sure) to the 
>>disk is what's producing these errors.
>>
>>Now for my question.  Do you think maybe the processor is bad, or do
> 
> you 
> 
>>think maybe there's something wrong with the IDE controllers?  This is
>>kind of an odd problem.  I'm certain that the disk is good.  I've had 
>>very good luck with it thus far (of course I'll probably plunk it in 
>>another system and give it a good diagnostical checkup to make sure.) 
> 
> I 
> 
>>tried running the processor at 166 Mhz as opposed to 200 Mhz in a vain
>>attempt to see if maybe for some reason the CPU was overheating, but 
>>that I see is most likely not the problem.  I did over clock it once
> 
> to 
> 
>>233 Mhz, and had the segmentation faults start occuring (this was
> 
> before 
> 
>>I'd used the system pretty much at all though,) so I originally
> 
> thought 
> 
>>that maybe I over heated the CPU and thus set it back to 200.  It
> 
> seemed 
> 
>>to work alright, but it's still producing these errors (only when I
> 
> use 
> 
>>the disk a great deal though.)  Very strange.  Any ideas?
>>
>>James
> 
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.2.1 (GNU/Linux)
> 
> iD8DBQE+cPPmE5xXU3JS1mQRAmXSAKCFtB8TBHqVsuSeNkPEYrQtp37ingCgpdt7
> 1HKWo2E+i9zmjtukCOYu4yY=
> =oPpO
> -----END PGP SIGNATURE-----
> 
> 
> 
> 
> 
> 

-- 
The New Penguin Times: A New Linux Online Magazine
http://www.newpenguintimes.com