Do you have the most current version of pump?  There was a bad one in the RH
distros for a while.  Also, some ISP DHCP servers require a hostname to be
fed to pump; some require a specific hostname.

> -----Original Message-----
> From: lowell [mailto:lowell@kc.rr.com]
> Sent: Monday, April 22, 2002 6:55 PM
> To: kclug
> Subject: Try, try again...
> 
> 
> Folks:
>    Coupla questions about pump and a D-link dfe-650 on a ThinkPad 770 
> running RH7.1:
> I've run ifconfig and gotten it to say there's an interface 
> present, but 
> pump always says "operation failed" after timing out on the 
> fourth try. 
> Ran "/etc/pcmcia/network restart eth0" with similar results. 
> Somewhere 
> in there I unplugged the card and plugged it back in and got 
> something 
> about "trigger... while transmitter busy". In 
> /lib/modules/2.4.2-2  I've 
> got a red flashing "build" which seems to inicate
> that it's not there and should be.
>    Every so often "eth0: interrupt from stopped card" shows up on the 
> command line.
> Any of this ring any bells with anyone?
> 
> TIA
> RSVP
> Lowell
> 
> 
> 
> 
> majordomo@kclug.org
>