On Mon, 10 Jul 2000 10:53:11 -0500 Rick Palmer <repalmer@sunflower.org>
writes:

> Unless something has changed you need to 2 different NIC cards.  It 
> will load the first then use the same module to load the second 
> stomping on the first.  I've had luck using a 3 Com and an NE2000 . 
> They can be the same brand as long as they don't use the same 
> module.

  I have identical NICs in van_pelt...  Here's /etc/modules:

#ext2 
#serial 
#slhc 
#ppp 
#the 8390 is required for NE
8390 
ne io=0x320,0x240

  Notice that you can use two cards just by separating the io addresses
by a comma.  The order is important, because the first one is eth0, and
the second is eth1.

________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.