From: remco@hip-hop.suvl.ca.us (Remco Treffkorn) Subject: Re: Old WANGTEK streamer Date: 5 Mar 1993 02:26:00 GMT
remco@hip-hop.suvl.ca.us (Remco Treffkorn) writes:
: michael@guug.de (Dr Michael Schmidt) writes:
: :
: : I just got ahold of an old dusty WANGTEK streamer. And I wonder, whether
: : I can use it with linux. I do not know anything about it beside what is
: : printed on the board or the streamer itself:
: :
: : board WANGTEC ASSY 30850-008
: : streamer Model No: 5099EN24
: : ASSY No: 30132-010 Rev.C
:
: I am using the same thing. But you will need a QIC36 controller to make
: it work with the QIC02 driver available for linux. ARCHIVE makes such a thing.
: I got mine for $5 surplus. it is a halfcard and you have to give it an IRQ
: (2...7) and a DMA channel (DRQ/DACK 1,2,or 3). That is all. Without the
: controller you can still use the drive as a paper weight :(
:
: mfg. Remco
Silly me! you seem to have that board. My board from ARCHIVE and
the ASSY # is 80530-152. The 152 is just stamped on. I do not know
if your board is different (30850) or if this is just a typo.
There is one more jumper block: ADR CMP. This just sets the i/o
adr. of the board. The pair labeld '10' is A10, '9' is A9 and so on.
Jumper installed = 1, jumper pulled = 0.
My board is set to 310H. the settings are (from 10...3):
01100010.
Tell the QIC02 driver about the INT, DMA and I/O you chose.
mfg. Remco