From: drg50@Frobozz.COM (Dave Gavin) Subject: Re: SLS missing linux/autoconfig.h ? Date: 28 Jan 1993 15:17:06 GMT
In article <1k7d1tINNlu@iskut.ucs.ubc.ca> andy@orchid.bdc.ubc.ca (Andrew Dwelly) writes:
>
>I started uploading SLS on the 25th of January - my first attempt
>at a linux installation. Up to now it seems to have gone very
>smoothly. Finally I got to the point where I wanted to make
>a new kernel because our ethernet hardware sits on IRQ 3 rather than 5.
>
>I modified Space.c appropriately, did a cd to the top of the source tree
>and a make clean which worked, then a make dep which failed.
>It seems that /usr/include/config.h has the line
>
>#include <linux/autoconfig.h>
>
>.. and autoconfig seems to be missing from my distribution. Is this
>a bug or am I missing something ?
>
>In the meanwhile I've adjusted the hardware to fit linux's defaults so
>its not a major problem. But I'm curious as to what's going on. All
>comments gratefully received.
>
>Apart from this everything seems to be working fine. I'm very
>impressed.
>
>Andy
>--
>Andrew Dwelly - Biosciences Computing Unit, UBC, Vancouver, Canada
>(604) 822-6527, andy@bcu.ubc.ca
Did you do a "make config" first ? ;-) I found the same problem, which
went away when I RTFM and did the following sequence;
make config
make dep
make clean
make disk
Regards - Dave Gavin
--
/XX\ My opinions, |David Gavin - Amdahl Corp. - Boston, MA
///\\\3000 not my employer's |net: drg50@juts.ccc.amdahl.com
\\\///==\\\ | or amdahl!juts!drg50
\XX/ \\\1000 |CIS: 73147,155 BIX: davegavin
(If must use INTEL - run LINUX !)