From: k2@bl.physik.tu-muenchen.de (Klaus Steinberger) Subject: Re: WD8003 IRQs not autodetected Date: Wed, 28 Apr 1993 07:01:47 GMT
becker@super.org (Donald J. Becker) writes:
>In article <1r75b7INN1tf@nestroy.wu-wien.ac.at> lenneis@wu-wien.ac.at (Joerg Lenneis) writes:
>figure out the IRQ line by generating an interrupt, but I haven't
>figured out an easy way to do that with the 80*3. Would people prefer
>the default/"guessed" IRQ to be 5 rather than 3?
Yes, yes, as IRQ 3, and IRQ 2 are normally used by the serial lines,
and IRQ 5 is normally not used (only by old XT disk controller), I
configure the WD8003 on all PC for IRQ 5.
Sincerely,
Klaus