From: buschman@slsvaat.sel.de (Andreas Buschmann US/ESI R.127 Tel.3841) Subject: Xconfig for 5Max / Berlina 14" Date: Mon, 5 Apr 1993 11:57:35 GMT
The good news:
Thanx to vgaset I now have a usable configuraion.
Hardware:
Monitor: Berlina 104075 SVGA Monitor, non interlaced, MPR II, 14"
VGA Card: 5Max VGA Card, 1MByte, et4000ax
(the label on the floppy disks says 4Max ??)
All bought from SCT, Schadt Computer Stuttgart
Monitor specs:
video bandwidth 60MHz
synchronisation 30-38kHz, 47-50kHz horizontal
50-90Hz vertical
resolution 1024 x 768 non-interlaced (60Hz)
dot pitch 0.28mm
VGA Card clocks:
25 28 31.5 32.5 36 37.5 40 45 50 57 63 65 72 75 80 90
The bad news:
only the 25MHz 640x800s mode is as sharp as I want it. 28MHz is only
a very little less sharp. Any other resolution gets more and more
blurred, the higher resolution more than the smaller. vgaset helps to
get it centered, but not more.
Any Ideas?
cable problem? wrong vga card? wrong monitor?
related question:
any Ideas for a high resolution black&white monitor?
or do I have to buy an xterminal?
Tschuess
Andreas
============================== Xconfig ==============================
# $XConsortium: Xconfig,v 1.2 91/08/26 14:34:55 gildea Exp $
# $Header: /home/x_cvs/mit/server/ddx/x386/Xconfig,v 1.11 1992/08/29
07:17:37 dawes Exp $
#
# Copyright 1990,91 by Thomas Roell, Dinkelscherben, Germany.
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of Thomas Roell not be used in
# advertising or publicity pertaining to distribution of the software without
# specific, written prior permission. Thomas Roell makes no representations
# about the suitability of this software for any purpose. It is provided
# "as is" without express or implied warranty.
#
# THOMAS ROELL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
# INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
# EVENT SHALL THOMAS ROELL BE LIABLE FOR ANY SPECIAL, INDIRECT OR
# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
# DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
# TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
# PERFORMANCE OF THIS SOFTWARE.
#
# Author: Thomas Roell, roell@informatik.tu-muenchen.de
# last edited: Andreas Buschmann, buschman@us-es.sel.de
#
# some nice paths, to avoid conflicts with other X-servers
#
RGBPath "/usr/X386/lib/X11/rgb"
# Use this if the Type1 font code is in the server
FontPath
"/usr/lib/X11/fonts/Type1/,/usr/lib/X11/fonts/75dpi/,/usr/lib/X11/fonts/
Speedo/,/usr/lib/X11/fonts/BitstreamType1/,/usr/lib/X11/fonts/misc/"
Keyboard
AutoRepeat 500 5
# Xleds 1 2 3
ServerNumLock
# DontZap
#LeftAlt Meta
#RightAlt Compose
#ScrollLock ModeLock
#RightCtl ModeShift
#Microsoft "/dev/ttys0"
MouseSystems "/dev/ttys0"
#MMSeries "/dev/mouse"
#Logitech "/dev/mouse"
#MouseMan "/dev/mouse"
#Busmouse "/dev/mouse"
BaudRate 1200
# SampleRate 150
# Emulate3Buttons
#
# The graphics drivers
#
vga256
Virtual 1024 1024
ViewPort 0 0
Modes "640x480s" "640x480" "760x570" "800x600" "912x684"
"928x696s" "928x696" "1024x768i" "1024x768"
#Staticgray
#Grayscale
#Staticcolor
#Pseudocolor
#Truecolor
#Directcolor
Chipset "et4000"
#Displaysize 1024 768
#Screenno 0
#Videoram 1024
# Clocks 25 28 32 36 40 48 50 65
#Clocks 25 28 32 36 40 48 50 65 0 57 0 72 80 132 101 128)
# clocks 25 28 32 36 40 45 50 65 50 57 0 72 80 90 101 130
#
# Next the mono driver
#
vga2
Virtual 800 600
ViewPort 0 0
Modes "800x600" "640x480"
ModeDB
# clock horzontal timing vertical timing
"640x480" 28 640 672 768 800 480 490 492 525
"760x570" 38 760 808 952 984 570 580 588 620
# Refresh rate = 65.54Hz ; Horizontal Frequency = 39.26KHz
"800x600" 36 800 816 952 1056 600 608 610 633
40 800 840 968 1056 600 601 605 628
38 800 832 984 1016 600 600 608 630
40 800 832 984 1016 600 600 608 630
# Refresh rate = 62.49Hz ; Horizontal Frequency = 39.37KHz
# 40 800 872 968 1104 600 600 606 624
# 50 800 856 976 1040 600 637 643 666
"816x612" 40 816 848 1000 1032 612 612 619 643
# Refresh rate = 60.28Hz ; Horizontal Frequency = 38.76KHz
"832x624" 40 832 873 1001 1090 624 625 627 651
# Refresh rate = 58.27Hz ; Horizontal Frequency = 38.17KHz
"912x684" 45 912 944 1112 1144 684 684 691 718
# Refresh rate = 54.79Hz ; Horizontal Frequency = 39.34KHz
"1024x768i" 44 1024 1064 1224 1264 768 777 785 817 Interlace
45 1024 1032 1192 1240 768 769 779 813 Interlace
"1024x768" 62 1024 1092 1220 1344 768 786 791 810
65 1024 1080 1184 1296 768 772 773 816
# Refresh rate = 48.16Hz ; Horizontal Frequency = 38.82KHz
# 80 1024 1056 1360 1392 768 768 780 806
# Refresh rate = 71.30Hz ; Horizontal Frequency = 57.47KHz
"1152x900" 62 1152 1184 1288 1360 900 898 929 939 Interlace
"1152x864" 101 1152 1184 1560 1592 864 864 877 907
# Refresh rate = 69.95Hz ; Horizontal Frequency = 63.44KHz
"1176x882" 101 1176 1208 1576 1608 882 882 895 926
# Refresh rate = 67.83Hz ; Horizontal Frequency = 62.81KHz
# clock horzontal timing vertical timing
"640x480s" 25 640 664 768 776 480 490 492 525
"928x696s" 57 928 992 1000 1184 696 696 699 730
# Refresh rate = 65.9Hz ; Horizontal Frequency = 48.1KHz
"928x696" 63 928 976 1168 1192 696 717 720 774
# Refresh rate = 72.46Hz ; Horizontal Frequency = 51.81KHz