From: dwex@cbnewsj.cb.att.com (david.e.wexelblat) Subject: [REPOST] Announcing the availability of XFree86 1.1 Date: 5 Oct 1992 12:58:23 GMT
[This is a repost. Sorry if you are seeing it twice. There are parts of the
world the original did not reach for some reason.]
Announcing XFree86 1.1
------------------------
(formerly X386 1.2E)
October 3, 1992
What is XFree86?
==================
XFree86 is an enhanced version of X386 1.2, the SVGA X server
Intel-based Unix which was distributed with X11R5. This release consists
of many bug fixes, speed improvements, and other enhancements. Here are
the highlights of the enhancements (items indicated by *** are new to this
release):
*** 1) The SpeedUp package from Glenn Lai is an integral part of
XFree86, selectable at run-time via the Xconfig file.
Some SpeedUps require an ET4000-based SVGA, and others
require a virtual screen width of 1024. The SpeedUps
suitable to the configuration are selected by default.
(Note that this is a relaxation of restrictions in
previous releases). Depending on the underlying hardware,
these enhancements can provide as much as a 50% improvement
in xStones.
2) The fX386 packages from Jim Tsillas are included as the
default operating mode if SpeedUp is not selected. This
mode is now equivalent in performance to X386 1.1b (X11R4).
3) Support for LOCALCONN, compile-time selectable for server,
clients, or both. This support is for both SVR3.2 and SVR4.
For SVR4.0.4 with the 'Advanced Compatibility Package',
local connections from SCO XSight/ODT clients are supported.
4) Support for the newer ET4000-based SVGAs which have high clocks
and reported incorrect clock values with the standard version.
This support is automatic and does not require any Xconfig
options. Note that the Diamond SpeedStar 24 is an ET4000 board
that is NOT compatible with XFree86 (in addition, the SpeedStar
24X does not use an ET4000, and is also not supported).
5) A command line option has been added to allow the selection
of which VT the server will use, rather than having it try
to find one on its own.
6) Support for compressed bitmap fonts has been added (Thomas
Eberhardt's code from the contrib directory on export.lcs.mit.edu)
*** 7) Integrated support for 386BSD, Mach386, and Linux (previous
versions required a seperate patch kit).
*** 8) The server's configuration file (Xconfig) can how be specified
with a command line option or an environment variable in addition
to the standard methods.
*** 9) A monochrome version of the server which will run on generic
VGA cards is now included. This server uses just 64k of the
memory on the VGA, and hence is limited to a virtual screen
of approx. 800x600.
*** 10) Drivers for ATI and Trident TVGA8900C SVGA chipsets. The ATI
8514/A chipset is NOT supported.
*** 11) New configuration methods which allows the server's drivers and
font renderers to be reconfigured from both source and binary
distributions.
Also included are a tutorial on monitor timing by Bob Crosson, and the
current X386 mode database and a sample xdm configuration by David Wexelblat.
Note: Support for the FAS serial driver under SVR4 (which was previously
supported by X386 1.2E) has been removed from XFree86 1.1. The
SAS driver is a Streams version of FAS has proved quite reliable
under XFree86 and should be used in place of FAS.
What about SGCS?
================
The changes in XFree86 were done with the full knowledge,
consent and cooperation of SGCS (Mark Snitily and Thomas Roell). These
changes are not derived from current SGCS work. The current SGCS product
is X386 1.3. It is the intention of all parties involved that portions of
the XFree86 changes be folded back into the SGCS product, the SVGA portions
of which will then be submitted to MIT for inclusion in X11R6. This code
will remain freely available, even though it is being included as a piece
of a commercial product.
What about accelerated boards?
==============================
At this time, there is no support for accelerated boards like the
S3, ATI Ultra (8514/A), TIGA, etc. This support is available in commercial
products from SGCS and MetroLink.
Availability?
=============
Source patches based on X11R5 PL17, from MIT, are available
via anonymous FTP from:
export.lcs.mit.edu (under /contrib/XFree86)
ftp.physics.su.oz.au (under /XFree86)
ftp.win.tue.nl (under /pub/XFree86)
Refer to the README file under the specified directory for
information on which files you need to get to build your
distribution (which will depend on whether this is a new
installation or an upgrade from an earlier version of
X386 1.2E).
Binaries are available via anonymous FTP from:
ftp.physics.su.oz.au - SVR4 binaries
under /XFree86/SVR4
ftp.win.tue.nl - SVR4 binaries
under /pub/XFree86/SVR4
ferkel.ucsb.edu - SVR4 binaries
under /pub/SVR4/XFree86
stasi.bradley.edu - SVR4 binaries
under /pub/XFree86/SVR4
blancmange.ma.utexas.edu - SVR3 (ISC) binaries
under /pub/ISC/XFree86-1.1
tsx-11.mit.edu - Linux binaries
under /pub/linux/packages/X11
agate.berkeley.edu - 386BSD binaries
under /pub/386BSD/0.1-ports/XFree86
nova.cc.purdue.edu - 386BSD binaries
under /pub/386bsd/submissions/XFree86
vernam.cs.uwm.edu - Mach386 binaries
under /i386
Each binary distribution will contain a README file that
describes what files you need to take from the archive, and
which compile-time option selections were made when building
the distribution.
[For Mach386 - a message explaining how to SUP the XFree86
binaries will be posted to the machi386 mailing list]
Systems XFree86 has been verified as working on
=================================================
Esix 4.0.3A and 4.0.4
Microport SVR4 3.1 and 4.1
Dell SVR4 2.1
UHC SVR4.0 version 2.0
Consensys SVR4
MST SVR4
ISC SVR4
AT&T SVR4
[We believe that it will work correctly on all Intel-based,
ISA/EISA SVR4's - MicroChannel has not been tested]
Interactive SVR3 2.2 and 3.0
Linux
Mach386
386BSD
BSD/386
Future Directions
=================
XFree86 will be an ongoing project; we are currently in the
planning phase for our next release. Some of the items under development
are:
- Fixes for any more bugs we find (or that are reported to us).
- Continued performance improvements.
- Implementation of server-side support for the X Input Extension.
- Support for building SVR3 shared libraries.
- Continued work on the monochrome server.
Our source patch kit will track any MIT official fix releases that are
issued between now and the next major release. Announcements will be
posted when updated patches are available.
Acknowledgements
================
XFree86 was originally put together by:
David Dawes <dawes@physics.su.oz.au>
Glenn Lai <glenn@cs.utexas.edu>
Jim Tsillas <jtsilla@damon.ccs.northeastern.edu>
David Wexelblat <dwex@mtgzfs3.att.com>
386BSD support by:
Amancio Hasty Jr <hasty@netcom.com>
Rich Murphey <rich@lamprey.utmb.edu>
Original 386BSD port by:
Pace Willison
Mach 386 support by:
Robert Baron <Robert.Baron@ernst.mach.cs.cmu.edu>
Linux support by:
Orest Zborowski <obz@raster.kodak.com>
ATI driver contributed by:
Rik Faith <faith@cs.unc.edu>
Trident driver contributed by:
Alan Hourihane <alanh@logitek.co.uk>
X386 1.2, and moral support, from:
Thomas Roell <roell@sgcs.com>
Mark Snitily <mark@sgcs.com>
Other contributors:
Bob Crosson <crosson@cam.nist.gov>
Thomas Eberhardt <thomas@mathematik.uni-Bremen.de>
and a horde of beta-testers around the world!
Contact Information
===================
Ongoing development planning and support is coordinated by the XFree86 Core
Team. At this time the Core Team consists of:
The original "gang of four":
David Dawes <dawes@physics.su.oz.au>
Glenn Lai <glenn@cs.utexas.edu>
Jim Tsillas <jtsilla@damon.ccs.northeastern.edu>
David Wexelblat <dwex@mtgzfs3.att.com>
Those supporting non-SYSV operating systems:
Robert Baron <Robert.Baron@ernst.mach.cs.cmu.edu>
Rich Murphey <rich@lamprey.utmb.edu>
Orest Zborowski <obz@raster.kodak.com>
e-mail sent to <xfree86@physics.su.oz.au> will reach all of us.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
David Wexelblat | dwex@mtgzfs3.att.com | Somebody get me a
AT&T Bell Laboratories | ...!att!mtgzfs3!dwex | cheeseburger!
200 Laurel Ave - 4B-421 | |
Middletown, NJ 07748 | (908) 957-5871 | --Steve Miller Band