From: wolff@liberator.et.tudelft.nl (Rogier Wolff) Subject: Re: HELP - Need to log in through serial port Date: 16 Dec 1992 08:20:11 GMT
zzulich@ipc1.rrzn.uni-hannover.de (Thomas Ulich) writes:
>Usually it's easy to do:
>Just edit the file /etc/inittab. Therein you'll find a commented line that
>says something like:
[deleted]
>Finally you have to reboot your Linux to get the things working.
Not needed. To have your additions to /etc/inittab take effect you
can also issue the command
kill -1 1
This will send the HUP signal to the init process, which will
then re-read /etc/inittab. (you have to be root to do this).
Roger
-- **** a 486 in V86 mode is like a VW buggy with a 6 litre V12 motor. **** EMail: wolff@duteca.et.tudelft.nl ** Tel +31-15-783644 or +31-15-142371